Questions & Answers for: Ford F-150 window switch

...window switch on the drivers door for the passenger window will not open and close the passenger side window but the passenger side switch works fine. Any help???? try taking apart and cleanig all ...

...if nothing happens,like no sign of electrical load,your circuit has a problem,most commonly window switch is bad. you should hear a relay clicking when pushing switch if switch is good. hope it ...

...motor. Try pounding with your fist on the door panel(careful it is plastic) with the key on,and holding the window switch in the up position.If the window starts or goes up,replace the window

...switch that allows you to deactivate the other window switches? Many vehicles have this as a child protection feature. If there is not such a button, the individual window switches are likely the ...

window switch. The Ford 04-08 MY trucks changed the design of the switch, and it is common for the most used window to have carbon build up on the contact pads in the switch, which act as an insulator

...window switch or with the window lock. If you snap the window lock switch back and forth a few times, it might start working again ( this is the switch to supply power to the other windows ). If so, ...

...window switch and wait for it to kick in. Worked 4.0 for about a week and suddenly no windows work. The lights on the switches work, but when you push on any switch in the truck the window doesn't ...

...window switch, note the carbon build up on the contacts ) I would start with checking for broken wires, by metering the window switch for power. The back passenger's window switch should be getting ...

...Window Switch). If the Power Windows didn't stop working at the same time, you may have faulty Window Adjust Switches, or faulty Power Window Motors, this is very unlikely though. It would also be a ...

...window switch, relay or fuse. Could also be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return ...