Questions & Answers for: window crank

Question about 1993 Cherokee Country

1 Answer

crank window I recently replaced the Passenger side vent window assembly and now I have difficulty cranking the door window up and down. Although it cranks hard the problem is at about 2 inches from ...

Ad

...crank window, drivers side, 97 honda civic 1996-00 Civic 2-doors had a problem with the front windows binding or coming out of the run channel. The window regulator needs replaced and the rubber run ...

Ad

...I reposition window crank handles on jeep patriot 2009. Thanks you need to use a window crank removing tool and remove handle. Make sure window is all the way up before reinstalling handle on

Question about 2000 Wrangler

1 Answer

...window crank? first you need to remove all screws in thje door panel then remove the crank handle with a pick or special tool to remove the clip that holds the crank arm on. then remove the panel and ...

Question about 2005 Spectra

1 Answer

...window crank handle, pull the handle toward you exposing the window crank handle retaining clip on the back side of the window crank handle. Using your trim panel removal tool, apply pressure to the ...

Question about 2003 Spectra

1 Answer

...window crank handle, pull the handle toward you exposing the window crank handle retaining clip on the back side of the window crank handle. Using your trim panel removal tool, apply pressure to the ...

crank window to replace power window on 1986 vette to replace power window, with a crank window on 1986 vette I think you would know that you have to change the window regulator to a crank type

Question about 1995 Civic

1 Answer

...window cranks and I would like to be able to roll down the windows. My issue is that we bought replacement cranks, however the gears in the door panel that the crank is supposed to connect to is too ...

...window crank if manual crank, door panel, remove film/paper seal. If is mechanical crank: check for worn out parts on gearing and racks (reinstall crank and wind window up and down). Replace worn ...

...window crank on a 1997 Chevy Lumina? The window crank is held in place by a locking clip. Remove the clip and pull the crank off the shaft. If the crank is stripped, just replace it. If the shaft is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...