Winding the bobbin? I just got a new Janome Mini Compact machine today, and I have followed all the procedures and steps for winding the bobbin. But, for some reason when I am pressing the foot switch
Electrical problem? both the stitch indicator light and needle up/down button are not working after having it serviced for a mechanical problem. What could cause this? Neither the needle up/down or ...
Question about Memory Craft 9000 Computerized Sewing Machine
my bobbie want wind on my machine. my bobbie want wind i have took it to the place where i got it to get it fix and when i got home it still was not fixed. what do i do now? when it windes now my ...
Question about Memory Craft 9000 Computerized Sewing Machine
I have no tension on my bobbin as it winds and it winds unevenly. I have a Janome 10001. Lightly pinch the thread and guide it as the bobbin winds.
I am having problems winding the bobbin as it will not stop when full and it is very uneven. I have just had it serviced. Ann Double check you are threading correctly for bobbin winding. It should ...
I have a Janome 10000 and I am trying to wind some bobbins so i can get started on a project, however the winder is winding the thread very loosely and I know it will just knot up if I try to use it ...
Question about Memory Craft 10000
My Janome 3018 will not wind a nice tight bobbin. They are loose and spongy. This machine is brand new. I have double checked that it is threaded properly and the thread is in the correct place and My
Question about Memory Craft 10000
Bobbin winder is engaged and shows up on screen correctly, but sewing mode is still engaged and bobbin winding keeps stopping. I've wound hundreds of bobbins on my machine, but suddenly with the ...
Question about Memory Craft 10000
Re Janome 7330 bobbin winding problem. Thread jumps out of the top guide when bobbin is winding. I've tried everything; different speeds, main spool upright,tightening the screw on the thread guide. ...
Question about Memory Craft 10000
Janome 500E Memory Craft embroidery machine with bobbin winding issues. When winding a new bobbin it winds about 1/3 of the bobbin okay, then starts looping and making a total mess. Seems to wind ...
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions