...spark plugs in my suzuki 2008 sx4. Please advise on the location of the spark plugs. Thank you. You remove the rectangular plastic cover on top of the engine(2 screws), under that is the plug wires ...
...car out in the winter and it won't start right away but mine will not start at all. Now as of Wednesday it is making a clicking-grinding noise and won't start sounds like your battery is just ...
Question about 2007 SX4
...car wont start changed cam sensor in dizzy changed all things i thought could cause it but nothing have spark at coil down to dizzy but no spark at plugs the engine (there are more than one engine) ...
car dosn,t start all cars must crank first, if no crank it can never start unless its a M/T car (stick) and you push start it. it cranks robustly, i will ASSUME. since you said spark is dead, on all 4
no spark car cranking and there is no no power to spark plugs no spark only one time No spark from coils the triggering is create by the crank shaft sensor then to ignition module then to coil.
START BUT THE CAR NOT STARTED. wow, no year, you do make this hard......near impossible...... IS THIS a Suzuki SX4 and what engine options, starting 2 second and 3rd 1st is: the first words are CRANKS
start 1. battery charged 2. spark plugs cleaned 3. replaced starter motor with solendoid still no crank Is the battery holding the charge, and does it have any dead cells? Try boosting it, if it turns
Question about 2007 SX4
spark plugs with correct gap for every engine made., sorry, so you need to do that. the FSM for you car (book) cover this, step by step. ill assume the plugs match your car same EPA sticker shows that
Question about 2008 SX4
...bad pin conditions guess one: 2.0L engine. found on usa cars, but more engines outside, USA, so answering for USA spec. car. my guess (unsaid by u) is you connected the scan tool and it put out only ...
Question about 2008 SX4
...engine shake hood up, parked, safe. misfire has 3 cuases bad engine bad spark bad fueling. we use tools(gauges, meters, etc) to find the cause step one in USA is scan the OBD2 port for say P03xx ...
Usually answered in minutes!
145 Questions
36 Questions
15 Questions
11 Questions