Questions & Answers for: Chrysler car start bad spark plugs

...car be driven Ok, this is not good. you will have to replace the head soon. this is a stripped spark plug port. the threads are ruined and, this will require you to replace the entire head. you can ...

car will not start after changing crank sensor, battery, spark plugs and fuel filter I'm assuming that it did not start before replacing all of these things. The value of reading out any codes with a ...

start , changed fuel pump , egr , still sometimes does not want to stars have you tried replacing your fuel injectors you have a v6 do there will be six of them also you may want to have your ignition

START. I GOT A HOLD OF SOME BAD GAS SO WE DRAINED THE FUEL ADDED DRY GAS PUT MORE GAS AND IT STILL WONT START. I GAVE IT A TUNE UP TRIED TO GIVE IT A JUMP IT STILL DOESNT START. THE FUEL PUMP KICKS ON

...start car turns but won't start - 1994 ChryslerConcorde 3.5 V6 replaced spark plugs, checked pressure for gas flow it's 50psi, noticed that old spark plugs were wet with wide gap on tip. Have you ...

...start the car it turns over just fine. acts as if it's not getting any fuel or spark. I checked all the fuses they are good, I listen to the fuel pump and i can hear it whirl when you turn on car. I ...

...car that it won't start. And that gadet did not read nothing. He said the computer is out, can that be true? It turns over but won't start. Its a 98 Sebring. opeok,is it getting fuel? is it getting ...

...start your car. 3. If your engine is cold, and you have an older car, ensure to get your fuel lines to the engine flushed or have fuel injection service performed 4. The engine tends to warp the same ...

...bad or shut down.. Start with simple stuff alt batt and spark plugs follow up with ignition system... Check web for testing of system alot easy way if uou font have tools.. Bad spark plug in these ...

...start First two things to check-spark and fuel. Check fuel pressure with a fuel pressure gauge tester, check for spark on a plug wire. If no or too low fuel pressure (should be about 40-50psi, check ...