Questions & Answers for: wii screws

DS game inserted into Wii Any suggestions for removal of DS game from main slot for Wii? tip it upside down or take the screws off, which you need a special screw driver for.

MY NINTENDO WII HAS A DISC JAMMED If your eject button will not force the disc out, your going to have to open the Wii. You will need a small Phillips head screw driver, a Tri-Wing screw driver, and a

...Wii_disassembly Once you get to ? 'Remove 4 DVD drive screws' Dont do that, just take the 5 screw off the top of the Drive, and the drive will split into 2 and you can easily remove your disc. ...

Wii and game worked fine, but I couldnt get the game to eject. After trying to get the screws undone so I could have a look inside "warranty expired" Ive found that getting some of those screws out is

Screws Flip the Wii over onto its right side. Locate and remove the two rear rubber feet and the two rectangle stickers near the faceplate. Remove the two silver Triwing screws in the holes and remove

MY NINTENDO WII WILL NOT POWER UP, THE POWER WAS TURNED OFF AND WHEN TURNING POWER BACK ON WII NO LONGER POWERED UP AND WILL NOT TURN ON, NO POWER LIGHT COMES ON EITHER. THANKS How old is your wii ? ...

Wii should work again. Second: - open the panel on the AC adapter box in the power cord; since the screws are proprietary, you will need to creatively use existing tools to turn the screws - check the

...all the shield screws and the heatsink and fan housing. Some people just take the front half a dozen screws off and bend the shielding back to get at the dongle. It depends how much you love your

screws revealed on the bottom of the wii. Use the scalpel to remove the rubber foot that is covering a screw in the top left corner at the back of the wii. Remove the screw using the fine phillip head

take apart a wii console want to take apart You need a triwig screwdriver to take a wii aprat like a y shaped screw piece then. Made a video showing how to take apart the Wii.