...whirlpool dishwasher and after i used it the last time the light on the panel flashes on air dry (control lock) When i try to clear it 2 or 3 of thelights flash at once. Control Lock means that the ...
Question about 24 in. DU1100XTPS Built-in Dishwasher
...whirlpool dishwasher control is locked. I tried hitting several button and the light went out. I turned the dishwasher on. It filled with water and then stopped with the controls locked button ...
Question about 24 in. DU1100XTPS Built-in Dishwasher
...whirlpool logo (not sure if its a button but there's no LOCK button) Anywho that seemed to do the trick. The light stopped flashing and then I just hit normal wash. Now its working again! Thanks for ...
...dishwasher will not start at all now the Air Dry Button just flashes. I tried to hold it in for 5 seconds like the manual says but it just switches off then the lock button lights up for a second or ...
Question about 24 in. DU920QWD Built-in Dishwasher
...Locked light glows. If you press any pad while your dishwasher is locked, the light flashes 3 times. To turn off Lock: Press and hold Heat Dry for at least 4 seconds. The Control Lock light turns
Question about GU3600XTSY Stainless Steel Dishwasher
...dishwasher is locked, the light flashes 3 times and the selection is ignored. If the lock symbol is lit, press and hold HEATED DRY for 4 seconds. The light turns off. If the control panel is not ...
Question about GU3600XTSY Stainless Steel Dishwasher
lock light stays on my whirlpool quiet partner II This question is regarding MY WHIRLPOOL QUIET PARTNER II. The light above the Start button is flashing along with a solid green light next to the lock
Question about GU2400XTP Built-in Dishwasher
Whirlpool dishwasher "heated dry" light flashing? Hi Kevin,... It appears that it could be something to do with the locking feature on your washer. Check out page 17 on your attached manual. Hope this
...on and the lock stays in place even when it has been unplugged over night. when I press the start button I get the 3 flash / 2 flash code. Whirlpool Dishwasher Error Codes HE Models Sears ...
Question about GU2400XTP Built-in Dishwasher
...whirlpool dishwasher won't run If you aren't sure whether Control Lock is on, press a cycle button on the keypad. If Control Lock is on, the light will blink three times. Turning off Control Lock: ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions