Questions & Answers for: whirlpool bleach dispenser problems

...Whirlpool is doing nothing about it! This may not be relevant, but by design, bleach does NOT dispense in the Buly/Bedding, Kids Wear, and Silk/Ultra Delicate cycles. If you try to use it, it remains ...

dispenser quit dispensing about 4 washes ago. After the wash is complete, the softner is still there. The detergent and bleach dispensers are still working fine. Can you tell me what the problem might

...bleach dispenser is the problem. It needs to be replaced. All of the bleach isn't leaving the dispenser so when you go to wash your colored clothing what's left in there comes out. Best thing to do ...

Whirlpool Duet dispenser problem The fabric softener and bleach will not dispense properly. They're still in the dispenser after the wash. Both liquid and powder detergent dispense ok. My new Duet was

...bleach dispenser (which I never use) was not connected. Evidently when using the extra large load a little water would splash into the bleach dispenser, hence the small amount at bottom front left ...

...bleach dispenser dispensing bleach as well. What is the problem and how can I fix it? take the top of washer off and on the dispener area there is Actuator it should move over during that cycle if it ...

...Whirlpool Steam Washer, front load will not dispense Check to see if the line is plugged up. I had this problem. Several wash cycles completed without emptying the bleach or fabric softener cups. ...

...bleach dispenser on my Whirlpool Cabrio washer Stop using bleach in the dispenser. Just put it in the tub after your wash machine has filled with water. The problem is, bleach eats away at the enamel ...

Whirlpool Cabrio top load washer bleach and detergent will overflow. Ran the machine through the automatic diagnostic test and both the bleach dispenser and the detergent dispenser overflowed. Water ...

...distribution system when set to bleach dispense. Its possible that the dispenser motor or the dispenser contacts have a problem. You can see the parts easily by taking off the top panel of the