steering wheel Can i change the steering wheel myself or doe's it need to be carried out by a garage and how hard would it be? you can do ityourself if you have a wheel puller.
wheel bearings is there any nasty suprises changing the front wheel bearings on my 2004 lr freelander td4 u will need access to a hydraulic press to remove the bearings and re-install them in the hub,
Car quit moving, but is still running. I was just driving my car and all of a sudden I heard a clunk sound and the car would not drive. It was still running, but would not drive anymore. is it a front
...back on in exactly the same position the freelander is a permanent four wheel drive so to spin the wheels you have to raise all four wheels off the ground ...
...arms. the garage should have checked these though! if the wheel is vibrateing then it may need the wheels rebalanced. if it is that you steering will shake at ...
...the head gasket and messed up the cam timming and need to reset it first off remove belt and cam wheels . install inlet cam wheel on inlet cam or rear one if standing in front off car. by looking ...
i own a freelander 2004, latley i changed the two pair of ball joint steering and sunpension arms, but i have still like a click going on the drivers side itseems something in the wheel , but not sure
suspected rear wheel bearing problem, but is there a second bearing just at th drive shaft on the rear rhs that could be causing the noise.? 2005 freelander td4. Thanks billy Hi Billy If it is just a ...
...Module.Disconnect SRS connection.Disconnect steering wheel multiplug.Make steering wheel and front wheels central.Hold wheel and release/loosen big-fat-centre-nut.Pull wheel from splines.Remove and ...
Front wheel noise scraping sound from drivers side front wheel when taking a corner Check wheel bearing for failure or adjustment. Check cv joints.
Usually answered in minutes!
931 Questions
392 Questions
319 Questions
132 Questions
68 Questions
