wheel fitment options. Help. Are harley wheels interchangable? I want either fatboy wheels front and rear ( early 16" ones) or a 21" on the front on my street bob (2006). I think all the wheels i've ...
trying to remove rear wheel I need to remove my rear wheel? Raise the rear wheel off the ground making sure that the bike is properly supported and will not fall. Remove the nut from the end of the ...
Question about 2004 FLSTF - FLSTFI Fat Boy
What are my wheels on my 2004 Fatboy made of. Are What are my wheels on my 2004 Fatboy made of. Are they chrome or not? Most of the original solid wheels for the Fatboy were cast aluminum wheels that ...
Question about 1993 XLH Sportster 883
...Also The width of the 2000-up Wheel will be a little Wider (about .200" = a little under 1/4"). The Wheels from 1984-1999 will be the Same for the Same Model of Harley. All Harley Wheels from ...
how do you ajust rear wheel so it is alignedright? 1.loosen the bolts on either side of the bike at the rear of the frame. this is what allows the back wheel to be adjusted. aka wheel adjusters. ...
...wheel. Also, different models of bikes may or may not have an offset between the front and rear wheels. The only alignment that you have any control over is the alignment of the rear wheel inside ...
...wheel and the rear brake caliper bracket acts as the spacer on the other side. Anytime you take the wheels off your bike, always mark and make a drawing of the positions of the spacers. Good Luck ...
...they will not stay tight. Since the spokes came loose this time, they'll do it again. I've seen wheels laced like this before and the "knobs" on the hub end of the spoke does not lay in the holes ...
front wheel hub diagram Ihave a 1999 FXR2 I ordered a cutom wheel from Chopper Cycle (that was going to be a bolt on). The wheel does not fit. They will not return the wheel or help in any way. From ...
Question about 1993 XLH Sportster 883
the wheel and tire sizes front and rear for my 99 1200 sportster? Fitment for 1999 XL Tubeless Cast Wheels: Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions
