Questions & Answers for: 4 wheel drive won t engage

won\'t engage. Please help. Can\'t afford the dealer! i've been told it was the 4wd actuator located on the passenger side near were the cv joint goes in to the front axle a good test is to floor jack

Ad

...wheel drive not working won't engage front 4 wheel drive not working won't engage front wheels does engage front driveshaft help have you checked the front hubs  are engaged or engaging had ...

Ad

Question about 2000 Rodeo

1 Answer

4 wheel drive won't engage 4 wheel drive won't engage in what type of vehicle?

Question about 2003 Tundra

0 Answer

...wheel drive won't engage tundra 4 wheel drive indicator light flashes but 4wd does not engage I had this same issue with my 4WD. I tried all of the suggestions here, but none of them worked. It ...

...wheel drive won't engage I am having the same problem. If I remove the fuse for the transfer case I can hear the actuator engage and disengage. When I turn the switch on the dash all it does is ...

Question about 1989 S-10 Blazer

1 Answer

drive belt and it is OK. I have also checked the lever that you lift to push mower it is down. I am not repairman any suggestions? Does the wheel you took off only have one centre nut? If so it whould

Question about 1989 S-10 Blazer

1 Answer

...won't drive Lawnmower wheels won't drive If its a riding mower it probably the drive belts off track or slung off. The mower will still start up and turn blades with the drive belt off, but want ...

Question about 1989 S-10 Blazer

1 Answer

...wheel drive won t engage I have a2003 Chevy s10 I have replaced the vacuum ball under the battery but it still will not engage in4 wheel what should I check next Vacuum hoses and connection under ...

Question about 1991 C/K 2500

1 Answer

...wheel drive will not engage Replaced the actuator and checked the fuse, still won`t engage I think theres only 2 wires power and ground if its in4x4 should have power and ground allways check with ...

The right wheel drive won’t engage on my toro time cutter ss4225. It’s not locked up it just won’t drive. possible wheel adjustment or bad gears

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...