Questions & Answers for: wedge radio stopped working Cars & Trucks

Ad

...2004 odyssey The lense should unscrew from the outside , some bulbs are push and turn and some are wedge base which just pull out. push and turn bulbs have a metal base but the wedge base are all ...

Ad

RADIO CODE DISCONNECT NEGATIVE BATTERY CABLE. YOU WILL HAVE TO REMOVE STARTER FLYWHEEL COVER THEN REMOVE STARTER.I WOULD GET A LARGE SCREW DRIVER WEDGE IT SOMEWHERE ON THE FLY WHEEL.MAKING SURE NOT TO

Ad

...Support the window in a position needed to access the window rivets by inserting a rubber wedge door stops (1) at the front and rear of the window between the window and the door inner

...radio) you can wiggle the wires and I assure you that it will work. You might have find a way to wedge the wires in a way that will keep the connection. Unfortunately this is a common problem for ...

Question about 1999 300M

1 Answer

...radio is a snap, but locate a reliable "panel removal tool" first (basically a wedge-shaped stout thingie. There are 8 clips, 4 on the top and bottom and you may lose some in the dash so be careful. ...

Question about 1999 300M

1 Answer

...wire. (metal coat hanger) and make it striaght and make a hook on the end of it. Next find a wedge (door wedge works). put the wedge in the side of the door. where the front door meets the

Question about 2003 CTS

1 Answer

...working If the radio and/or window control quit also, its the Body Control Module(BCM), which is under the center console glove box, to the rear of the sub woofer. I wedged a small wood block under ...

...wedge radio 6-7 weeks ago and it has worked fine up till recently.It has now completely quit working and the face plate appears to be pixalated nd is not moving except for the 2 little dots in the ...

...radio on 2005 Nissan armada? is their a kit or packing to go around this part of dash? have you really searched and found the rettling noise? Now that you found it sometimes if you take a wad of ...

...the CD button, my radio works just fine. If its a 6 disk cd system the cd tray is wedge causing the cd option to not work. Most of the time one of the cd slipped out of its position causing it to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...