Questions & Answers for: Ford F-150 water temp

...water temp issue... check your thermostat and/or water temp sensor. when you first start your engine the computer uses the water temp reading to do a 'cold start' scenario, more fuel. once you reach ...

...Temp cools back down when drive normal. Your radiator is getting clogged up with mud causing the lack of air flow through the radiator. You may want to install a mud deflector in front of your ...

...water temp sensor located on the motor the temp guage on the instrument panel is not showing engine temp It's not the temp sensor you need, it's the temp sending unit you need. The sending unit ...

...temp guage will work? help Hi!! Look for broken wire or loose connection to water them sensor, usually located in the thermostat housing or very close by. If plug is tight and no visible wire damage ...

temp. What you can do is get the radiator flushed and coolant changed. Also check the water pump. To do so when engine is cold (in first start in morning), open the radiator cap and ask someone to rev

...water is circulating, the heater core is good cause heater core hoses heat up and temp sensor is good cause gauge goes up and down. I told him about the stuff I"ve changed but yet he ...

Temp gauge not working could be a few things, sender fault, no water, gauge fault or wiring. Check u have water in it. Then find the sender and earth it out, gauge should go all the way up, if it does

water temp Just added a manual temp gauge how hot can it go in farenheit without overheating 240F is what many call the beging of a hot run problem.

...and nothing changed. check your coolant. the temp is the water temp. Your radiator is out of water? you`ll burn out your water pump. Also check to see if your radiator fans are running

water sensor on a1991 ford f150 5.o Temp switch - Under hood, center, upper engine area, front of intake manifold, driver side of distributor, mounted in engine block, Coolant temp sensor - Under hood