Questions & Answers for: water temp

Ad

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...water temp, with or without the auto temp control. Temp is ALWAYS lukewarm. However, if I turn off the cold faucet, water temp is always hot. If I turn off the hot water faucet, it is always cold. hi ...

Ad

Question about SR24-H Built-in Dishwasher

1 Answer

...water temp settings will require a longer wash and rinse cycle to be programmed into the unit. Of course, you could simply lower the water temp on the water heater that supplies water to this unit, ...

Ad

Question about SR24-H Built-in Dishwasher

2 Answers

...dishwasher. The water temp is controled by the actual water heater at the residence. Is is hooked to the hot water side of your nearest sink. Good Luck Dave turn the temp. down on hot water ...

Question about SR24-H Built-in Dishwasher

1 Answer

...water heater temp to vacation (lowest temp) 2. Turn on power vent blower 3. Turn the water heater temp from vacation (lowest temp) to hot (highest temp) four times. 4. Set the water heater temp to ...

Question about SR24-H Built-in Dishwasher

2 Answers

...water temp is hot enough to efficiently disolve your laundry detergant. The preset temps are usually around 75* for cold, and 105* for warm. Hot water comes in at whatever temp your household water ...

Question about DMR78AHS Builtin Dishwasher

1 Answer

...temp of the water coming in the dishwasher? Other than the temp from the hot water line. The temp to the sink is very hot but when you open the dish washer the water just seems very warm. I didn't ...

...water temp was 50 degrees coming in to the water sump tray from water supply and the Ambient air temp surrounding the machine was a constant 70 deg than the machine should make ice every 10 - 12 ...

...water temp is to cold. changed thermostat and checked fluid level. water temp for heater no better. Actual water temp is cold enough that the radiator cap can be removed after warm up with lit ...

...temp of water via an accurate thermometer. If set temp, simply push down arrow. Water has not yet reached the set temp. If heater indicating 78, & water temp is actual 68, bad ...

...water temp 68 how do I reset heater temp to match pool temp. Sounds like a faulty temp sensor. Check it for debris, clean it good and see if that does it. If not try replacing it. Is 78 the 'Set' ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...