Questions & Answers for: water tank flipper

...water tank is full. Just empty it out and put it back in and the AC will start to work again. If that doesn't work then I don't know what the problem is, but I just had the E4 error and did ...

...code. Compressor runs 5 min. then kicks out showing E4 error code The broken water tank flipper will directly cause the unit to not function and the E-4 message will appear on the display

...water routing tank and remove routing tank simply by lifting off. 5. The thermal fuse is mounted to the top of the tank under a clip and is easily slid out from under the clip. There is a brown wire ...

...water routing tank and remove routing tank simply by lifting off. 5. The thermal fuse is mounted to the top of the tank under a clip and is easily slid out from under the clip. There is a brown wire ...

...water it runs on for a long time before turning off It sounds like the flipper valve in the tank is not closing completely and may need to be adjusted or replaced. To adjust the flapper, all you have ...

How to fix E4 error check the water tank flipper if broke it will directly cause the unit to not function and the E4 message will apper on the display screen.

...How to locate and how to replace? Thanks!! Try first unplugging the unit for ten minutes, and emptying the water tank. If the error does not clear, then replace water tank flipper. see how that ...

...water routing tank and remove routing tank simply by lifting off. 5. The thermal fuse is mounted to the top of the tank under a clip and is easily slid out from under the clip. There is a brown wire ...