Questions & Answers for: water cam

...water. New belt, top lid switch okay. I have concerns regarding the spin cam bar or other related conponents to cam bar. Belt instructions said to advance the spin cam bar to the spin position, ...

...cam driven water pump. If the gear is sheared/broken it can cause this issue. As L98 said, on this engine the water pump is cam driven, on my 94, there is a splined shaft sticking out from the cam ...

Slow water flow from GE SmartWater under sink water filter. Suddenly experiencing slow water flow from GE SmartWater under sink water filter (dual FQSVF filters). Tried replacing filters. Little ...

...cam, water pump, and I think the oil pump have nylon gears. It is comon that when cam gear fails the rest do also. I am having mine repaired now and was told the the replacement cam has a metal gear. ...

water pump to replace it and any handy tips please? cam belt cover and cam belt will have to be replace at same time and the pump as the cam belt drives the pump also.. you should take it to some some

...grill, and disconnect the water tube that goes into the door (as the tube is threaded through the door cam). After replacing the door closing cams and reassembling, there is no longer a popping

water pump and cam belt and all should be well. This is not an interference engine and the valves will not hit according to the Gates catalog, they're usually pretty reliable. In fact, very few toyota

...another micro switch to allow water in. Motor continues, as cam reaches a spot it releases the micro switch for water andthen the switch holding the motor on and unit shuts off ready to do it

...the cam belt on these engines be sure to fit a new water pump and pulley's. The water pump most of all. It is driven with the cam belt and they can and do fail. Can lead to complete engine

...WATER PUMP PULY,LOOSE BTWN TWIN CAM PULY N WTR PUMP PULY.TWIN CAM PULYS TO CAM SHAFT PULY TIGHT.TURNED ENGINE A COUPLE OF TIMES-BELT TIGHTENED.RAN ENG 10 MIN,PUT COVERS N MTR MNT-SAME ISSUE Belt ...