Questions & Answers for: watch stem pull bulova

...watch going. I pulled the stem out and set the time and pushed the stem back in. It is not running. Please advise look for a tiny, clear plastic spacer washer on the stem and remove it. this is just ...

...caravelle quartz mens watch? Pull the stem out 2 clicks the in 1 click turn stem clockwise for day and counter-clockwise for month. to set time pull stem out again 1 click, when finish push in 2 ...

...Bulova = setting the date - two insets - one for day - the other for month. The winding stem of the caravelle has two positions when pulled outward from the case. Pulling it full out lets you set the ...

...watch with 4 stems. 2 on each side. One is an on/off stem which is on the right side of the face. 1st: make sure the watch is set to "tme" , the botton dail display, press bottom right stem 2nd: pull ...

...watch, If yours has a stem (winder) it"s 2 position, to set Day pull stem out and rotate the hands till the day appears, push stem in all the way, Now slip your fingernail just under the crown and ...

stem to adjust the time, go thru the complete 24 hour cycle to adjust the DATE and time of day. You should have the DAY or Month and correct date and your watch will change the DAY, DATE at the proper

...stem out to set the time of day, keep cycleing the watch until you come to 1 day before the day you want. NOW! push the stem back in. NOW! slip a finger nail just under the crown and gently, gently ...

...a Bulova Super Seville watch how do you set the day and date? Pull the stem out one click, rotate stem clockwise to set day, counter clockwise to set day, pull stem out to second click to set ...

...stem goes in the watch. There are 2 screws right there, 1 left and 1 right.the one to the left is it, but only loosen it 2 1/2 turns no more than 3 or it will come loose from the mechanism below that ...

...to remove the movement from the front,tried to pull the stem out won't budge any ideas. this link is a good site for all watch problems ...