Questions & Answers for: watch change date dial

...change date/time? the crown is a screw down type to keep the watch water tight. Unscrew the crown (what you refer to as the dial) and you will then be able to set the date, time, etc. and be able to ...

date to change when I pull out the setting dial, I have tried pulling it out one click and two clicks and the date still wont change. Is this something I can fix or am I going to have to send it in to

...change the day on my watch, some months it is wrong. Pull out the crown to the first click- the watch is in day-date setting mode. Turn the crown one way- the date will change. Turn the crown another ...

...dial says that it is the correct time of day, how do I fix this so that the date changes at midnight? Advance your watch 12 hours, the date changes every 24 and it sounds like you are 12

change on it's own when the watch is keeping time the wheel that is supposed to turn the date needs to be replaced. A qualified watchmaker can do this for you. Hope this helps. Ken Kotoski Yellowstone

HOW DO I CHANGE THE DATE ON MY MICHELLE DECO WATCH Turn the dial toward you and pull out. Then turn the dial away from you to change the date (you can only go upward in date).

watch 24 hours to change the date. You can shorten the time it takes to change the dates in the following manner:- Wind the watch until the date changes, then turn it back until it passes 12 again and

...date, turning the other direction changes the day. If your day is on a small dial on the watch dial then pull the crown out two clicks and go around 24 hours at a time and you will see the day ...

...watch so that the date changes much closer to midnight. Note that some movements are designed to change the date at one time and the day of the week slightly later. This is done so that the power of ...

...in a kenneth cole kc9225? there two position to pull crown out position 1 -- to change date position 2 -- to change time bring crown to position 1 and turn counterclockwise to set date on your