Questions & Answers for: watch bezel removing

Question about 1440 Nylon watch

1 Answer

watch comes with interchangeable bezels, not faces. Bezel is a ring or rectangle (depends what shape your watch has) surrounding a glass. All bezels are mostly friction fitted,so, to remove your bezel

Ad

Question about Seamaster 2541.80 Wrist Watch

3 Answers

...watch maker and he has a special tool that removes the bezel however he told me he only uses it when he has customers watching. Because the old knife looks pretty brutial, but works better. Check out ...

Ad

Question about Submariner 16618 Wristwatch

1 Answer

...watch from bezel ring you will need a special press with dies as you will need it for refitting glass and bezel on to the case. I would advice to find your nearest watch repair shop and ask for help, ...

Question about Submariner 16618 Wristwatch

1 Answer

...bezel I would use a watch knife and gently press it in between the bezel and the case. Make sure you go straight in and it might not be a bad idea to use a layer of plastic around the knife so it ...

Question about Submariner 16618 Wristwatch

1 Answer

...bezel does not have screws but fake ones then the bezel should be removed by a qualified watchmaker because the bezel could be bent or damaged when removed. Hope this helps. Ken Yellowstone Watch

Question about Medana Goldtone with Interchangeable Bezels 2142 Watch for Women

1 Answer

watch? This is called BEZEL you want to lift off. Take watch case opener (or just a pocket knife), insert the blade between case and bezel, then carefully pry up bit by bit, going all around the case.

Question about Medana Goldtone with Interchangeable Bezels 2142 Watch for Women

1 Answer

...watch and I would like to remove the bezel in order to restick the 10 (or 22) mark on the dial, as it is wandering under the glass. Does the bezel go out or should I open the clock by the back and ...

Question about Classic Wave 9090F249725 Wrist Watch

1 Answer

...just turn the watch over and it will fall out 5 - small screwdriver and remove/replace battery 6 - reinstall watch guts/bezel and gold screws 7 - push crown back into watch Thank you for using

Question about Classic Wave 9090F249725 Wrist Watch

1 Answer

watch band holder meets the front bezel, and give the back of the knife a sharp rap with a small hammer. The front bezel should pop off. Some watches have a small circular plastic piece that will also

Question about Classic Wave 9090F249725 Wrist Watch

1 Answer

...bezel ring is stuck These bezels sometimes get clogged with dust and dirt, it will need to be removed and cleaned, there is a small spring underneath so care must be taken so it is not lost while ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Watches Experts

john h

Level 3 Expert

29494 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39363 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Are you a Watches Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...