solenoid on driverside rear of valve cover. if there is only one then that one connects to the vac pump and wastegate actuator on turbo. if two vac solenoids,then other one goes to EGR valve on intake
...Solenoid Valve is making this repeated knocking sound. Its from a 1988 Saab 900 Turbo 16V, it sounds like its opening and closing really fast. and when I unplug the wire it stop. What could this be? ...
code 44 code 44 should be turbo wastegate solenoid valve or circuit
...solenoid valve for boost pressure regulation. - Measure resistance between terminals of valve. Specified value: 25...35 Ohm If specified value is not obtained: - Replace Wastegate Bypass Regulator ...
...Wastegate Solenoid Circuit Error The ECM regulates turbocharger boost by opening and closing the "wastegate" as necessary. (The wastegate is a vacuum operated bypass valve that limits the ability of ...
...wastegate solenoid looking to replace If you do not know the location of the wastegate solenoid, how could you have properly tested it? Then, if you have not properly tested it, how could you ...
trouble codes p1693 and p1765 can you define ? Turbo control circuit (wastegate solenoid) p1693 Timing solenoid circuit (Variable Valve Timing Control)p1765
...wastegate solenoid. On the GM Duramax diesel, this code may mean the turbo housing resonator has failed. If you have a Ford, you'll want to next check the wastegate regulating valve solenoid for ...
...wastegate regulating valve solenoid for disconnection or damage. Repair as needed. 2. If no hose problem is found, replace the turbocharger wastegate regulating valve solenoid. Torque the two 8 mm ...
...Edge Turbocharger 2012 Ford Edge Turbocharger wastegate regulating valve solenoid location? Engine code P1016 Check this ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions