Questions & Answers for: waste tank

Question about CLP-500 Laser Printer

1 Answer

...waste tank even though you have wiped it clean the likely thing is that the sensor cannot see through the plastic waste tank. I suggest vacuum the waste tank out until all the toner has gone then ...

Ad

Question about CLP-550 Laser Printer

2 Answers

waste tank is full of toner or not installed. Open the waste tank door and check for the waste toner tank. If the tank is full or not intalled, install a new tank. If you have user guide, it will show

Ad

Question about CLP-550 Laser Printer

2 Answers

...waste ink tank for the ink used during print head cleaning. As time goes by, the waste ink tank gradually fills. When the waste ink tank is nearly full, you should receive a "Waste ink warning" error ...

Question about CLP-550 Laser Printer

2 Answers

...Waste Tank Full Sensor Defective The waste ink tank full sensor (a photosensor) on the corner of the waste tank is not operating. ? Waste ink tank sensor on the corner of the ink waste tank is ...

Question about i350 InkJet Printer

1 Answer

...waste tank absorber says its full. How do I empty it or fix it without getting a new printer. The POWER Lamp Flashes Orange Eight flashes: Waste ink tank almost full The printer has a built-in waste ...

waste ink tank is nearly full'' but I can't see a waste tank or how to remove anything below the ink cartridge. Is there an online repair manual somewhere? I found someone with the same problem at the

Question about CLP-500 Laser Printer

5 Answers

...waste tank is full/ not instaled what should i do. The "waste tank" is located behind the front panel that has the SAMSUNG name on it. Press on the upper corners of this panel and it will open up to ...

waste tank is full for my samsung CLP-300 printer. i don't know where is the waste tank located and how to clear the waste tank. The waste tank is inside the front cover of the CLP 300 on the left of ...

Question about MultiPASS MP730 All-In-One InkJet Printer

1 Answer

...waste tank on MP730 "waste ink tank How to clean waste tank on MP730 "waste ink tank nearly full" ? press menu - copy - # Select TEST MODE. Select [8] PRINTER TEST in TEST MODE. Select 3. ...

Question about MultiPASS MP730 All-In-One InkJet Printer

1 Answer

...waste ink tank on a Canon MultiPass MP730? A message on the screen indicated that the "Waste Ink Tank" is full. How do you find the location of the Waste Ink Tank? How do you empty the waste ink tank ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66850 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...