Questions & Answers for: washer walks empty

...washer walks! washer tub off balance. washer walks there may be a possibility here of the centre hub being worn or the liner tub bearing being worn due to the age of the machine.. here is a list and ...

washer stays out of balance full load or light load during the spin cycle and "walks" around vibrating so bad. I have to push it back to it's original position all the time. Very, Vert agravating. The

washer walks in spin cycle... even when empty. Removed cabinet, pump and motor... black dust on floor... and a little oily.... is the the coupler? Checked for level....checked triangle thing under tub

...washer is level. why when it begins to spin does it become so unbalanced? even empty? This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin ...

...walks across floor even empty http://www.askmehelpdesk.com/plumbing/whirlpool-out-balance-spin-cycle-18991.html http://fixitnow.com/sbrvrs/washers.htm ...

...washer is maybe 3 yrs old. It has been "walking" more and more frequently. Spins unbalanced even while empty. While unloaded, it is relatively easy to wiggle the basket around in there. Is ...

washer will fill with water - won't agitate, and is picky about which spin cycle it will drain and spin. Your timer controls all the spin cycles, when to empty and when to fill so I would check your ...

...washer is washing, it shakes and walks (some of the time). We spent $90 in January to get it fixed. Now, it's doing it again. KC try it empty if it's doing the same thing it's unbalanced ...

...did two loads just fine. However, on the third load, I put a couple of towels in there and set the washer on "heavy load" and then it didn't work- same thing- wet clothes and the

empty the tub then something is blocking the water, flow, i would look at the hoses for links or blockages Lots of top-load washers have fluid in the “balance ring” around the top of the washer basket