Questions & Answers for: washer sludge

Question about FJ1254W Front Load Washer

1 Answer

Grey sludge on my washing My Zanussi 1254W seems to be throwing grey slimy sludge back over my washing. I've tried using a washing machine cleaner at high temp. and fitting an inline anti-syphon ...

Ad

Question about WM2277H Front Load Washer

1 Answer

...WASHER WONT DRAIN, IT SAYS THE ERROR MESSAGE OE OE is a drain error - Check there isn't a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes ...

Ad

...and let soak over night. Skim off any sludge that is floating then allow the washer to run through the rinse cycle. Re-rinse a couple of times to clear the system. Good luck and let me know.

Question about WM-2277HW Front Load Washer

1 Answer

washer and drain it. What do i do know? OE is a drain error, here's some stuff LG recommends. Check there isn't a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged

Question about WM2487H Front Load Washer

2 Answers

...washer is not fully drained within 10 minutes. You have to check whether there is a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot ...

Question about WM-2277HW Front Load Washer

1 Answer

...washer is not fully drained within 10 minutes. You have to check whether there is a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot ...

Question about WM-2277HW Front Load Washer

1 Answer

...sludge http://www.appliancefactoryparts.com/applianceshvac/help-center/fault-codes/fault-codes-washer.html if you have any further questions message me back and please remember to rank how this ...

Question about WM2301HW Front Load Washer

1 Answer

...washer has too much build up of sludge from excessive use of detergent and fabric softener. You will need to purchase a package of washer machine cleaner from the local hardware store and run the ...

Question about WM-2277HW Front Load Washer

1 Answer

Dispenser assembly is covered with black sludge. The "black sludge" is a build up of algae and also washing powder and fabric softener. Remove the dispenser by pressing the small panel in the rear of ...

washer. Sink had been recently backed up by paint sludge, husband used sink to clean brushes. Now paint sludge is in Drum and Liner. Can drum be removed to clean on this model? Is the washer lost now?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...