Questions & Answers for: Honda CR 250 R washer nozzle

Ad

Question about 2002 CR 250 R

1 Answer

...obviously I've done something wrong in the rebuild! My prime suspects are the big nut with the tab washer in the centre of the clutch or the clutch springs. Both of these I did up as tight as I

Ad

...apart down to the bare crankcase. The crankcase should be steam cleaned in a professional parts washer. The crankcase should then be put in a jig fixture, to keep it from twisting while welding. ...

Ad

changing front and rear bearings on honda cr 250 how do i change front and rear bearings on a 2001 honda cr 250 hi buddy simply take the wheels off and the caps remove the dust seal with a screw ...

...rod. Place the bike on a stool [under engine] or bike-jack. Remove the chains, the nut, and washer. Knock off the rear-axle-bolt with a rubber hammer. [be careful the tire will drop down]. ...

...nozzle or tube to the rear. Not uncommon as the rear washer is only used now and then. The cleaner additive solutions used by most mechanics, can dry up to become crud and block the nozzle hole. if ...

side to side play in front sprocket on 02 cr250r bolt has flat washer on it but idk if a collar is suposed to go inbetween the sprocket and case half to take up space? If you look at the case , you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...