...washer was trying to get the sock out. The sock had disappeared when took washing out. Can't find how to see where it has gone. take the heater out it will be stuck round that or wraped round the ...
...drum of my washer. It makes a horrible clicking sound when you turn the drum either way. When I stopped the washer and drained it, I thought it went down with the water. But as soon as I started ...
washer drum got stuck, so I looked behind the back cover and noticed the the belt which connects the motor and the drum is lying on the base of the machiene. I couldn't get the belt back on but turned
...socks out that got stuck between washer drum and outside plastic drum. It took 10 mins. top. It seems when you pull clothes out of washer small items slip between inner and outer drums. BAD
Question about ZWF1430W Front Load Washer
...cycle, think something is stuck, have opened up backbut cant access drum If there is no removeable cover on washer, then you have to remove therear half of the cabinet to gain access to the drum
...washer, remove the drum belt, and try to turn the drum by hand, if it is noisy or rumbling, or not turning at all, then likely the the drum bearings have seized. This is a major repair, and could be ...
washer is not spinning and keeps burning belts out its proberly the drum bearings or you have something stuck in the drum was the machine getting noisy before this happend if so it will be your drum ...
washer fills water, drum is stuck you may have a sock stuck in between the drums rotate the drum when it becomes stiff you stop then take out the lower paddle by pulling it you may now see the sock
Question about IPSO 223/00102/40 Washer EXTERIOR BOX PB4 - IPSO Laundry Parts
drum is stuck hi electirics work even takes soap and water but the drum is stuck very hard to move thx hi have u lost any small items i have done a few washers were socks get throungh gap in drum at ...
...washer is off, I can move the drum by hand and hear something inside that is loose. I need to get in between the plastic outer drum (that doesn't move) and the metal interior drum. Consider bearing ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions