Questions & Answers for: washer air dome

Question about Neptune MAH5500B Front Load Washer

1 Answer

...Air dome? Our front load Neptune washer continues to fill the tub without stopping which has caused the door to bow open at the bottom. We have located the water level valve and it looks fine and ...

Ad

Question about WTW6400SW Cabrio Washer

1 Answer

...washer HE Top Load Washers Models: F1 Error Code WTW6200S WTW6300S WTW6400S WTW6600S WTW6700T MTW6300T MTW6400T MTW6500T MTW6600T MTW6700T Serial Numbers: CT01 - CU52 There are four areas of concern ...

Ad

Question about WTW6400SW Cabrio Washer

1 Answer

...washer is safe to work on... pull the air tube off of the water level switch. Now all you gotta do is blow through it to make sure it's clear. Sometimes, you have to blow real hard to clear out any ...

Question about Neptune FAV6800AW Top Load Washer

1 Answer

...washer drains, the air dome does not. We thought we should get the water out of the air dome and try again, but not sure how to do that. Is it correct that the air dome should drain when the washer ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...washer Error F 35 means Analog Pressure Sensor Failure- which means that there is a malfunction of the component detected by the Steamer Electronic Board. 1. Check that the pressure hose is fixed ...

Question about AWM8123 Front Load Washer

1 Answer

...to? I have a Whirlpool AWM8123 Front Load Washer. The model nuber you posted links to a whirlpool wall air conditioner. Is there anymore nmber you can find? and where are you getting this number ...

Question about WBSR3140D Top Load Washer

1 Answer

...you washer. If this does not repair the problem, then replace both the water level switch and the air hose. Make sure the washer is unplugged before you do this repair. Good Luck, Appliance ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...washer Hi Error code F 35 means ANALOG PRESSURE SENSOR FAILURE. There is any malfunction of the component detected by the Steamer Electronic Board. Please check whether the pressure hose is fixed ...

Question about Duet WFW9550 Washer

1 Answer

...air dome or pressure switch hose (key#21). The air dome is located on the back of the tub on the left hand side. (See image below) If the pressure switch hose and the air dome is clear of any ...

Question about Duet WFW9550 Washer

1 Answer

...washer and at first it is believed to be a machine/motor control fault. But it was found later that it can be due issues associated with the pressure transducer/switch system. Air leaks and moisture ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...