Questions & Answers for: Ariston Technologies washer 2 yellow lights

Washer not completing cycle I have an Ariston A1636 auto washing machine. 2 Years old. I can set the machine, put washingin, switch on. Water comes in but drum does not rotate. Left on the machine ...

2 lights are flashing each light that flashes gives a differant fault code . Get back to me always reset your machine ;turn your dial to the end of the cycle [ the dot] it should flash 3 times quickly

...lights start flashing on the last rinse then machine stops ariston A1636 wonder if this is a common fault in them if so i reckon they should recall them hvent had mine 2 years yet but got no extra ...

...lights to blink, switch off choose programme and switch back on but still does not work, Anyone have any ideas on this one, please? Try Cleaning your filter under the front of the washer it probably ...

Door latch broken I have the same problem - door wouldn't open because the handle broke. We were able to manually release the door. A piece of plastic broke off the latch on the door. Where can we ...

yellow, but I can't get the machine working 1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve

...2 years old yet I suspect that the motor or thr heater element has shorted. Remove the rear cover and unplug motor,remove the motor and check for worn brushes and or short on motor armature. If it ...

...2)Excessive vibration: noisey,roar, knocking noises. Bad damper,bearing or broken trunnion. no error code 3)Dispenser drawer open/detergent in wrong compartment: washer will not operate with drawer ...

I am attempting to replace the belt on my Ariston AS60V dryer The dryer belt is the correct one as compared to the old one but it seems a bit short once I loop it around the drum... Are there any ...

program knob Daughter pulled the knob off and now it won't stay on, have 3 plastic parts and a spring, don't know how I can fit them back together as when I put them on, the knob will not stay in ...