...wash plate should just lift off the leveler and u-joint. The washplate dome refers to the center cone that fits on top of the outer wash plate. This piece comes off by inserting a screwdriver in the ...
wash plate Model wtw660sbt. I have the new wash plate. How do I remove the old wash plate? Thanks. Hate to iron. You just have to take the cap off the center of the wash plate it pops off. then remove
Question about Elite 45986 Front Load Washer
...wash plate center dome from the wash plate. This is the center cone on top of the wash plate. Use a flat blade screwdriver and insert it into any of the slots available along the sides. Gently pry ...
...wash plate center dome from the wash plate. This is the center cone on top of the wash plate. Use a flat blade screwdriver and insert it into any of the slots available along the sides. Gently pry ...
Question about Calypso GVW9959K Top Load Washer
...wash plate center dome from the wash plate. This is the center cone on top of the wash plate. Use a flat blade screwdriver and insert it into any of the slots available along the sides. Gently pry ...
Question about Calypso GVW9959K Top Load Washer
...wash plate center dome from the wash plate. This is the center cone on top of the wash plate. Use a flat blade screwdriver and insert it into any of the slots available along the sides. Gently pry ...
wash plate. 1. UNPLUG THE WASHER. 2. Open the washer top. Look along the front seam of the washer where the top meets the front. There are a couple of retaining clips (about 2" in from each side) that
Question about MVWX500XW: Bravos X Top Load Washer with Low Water Wash
wash plate agitator located on the bottom of the tub.
Remove the 11 mm (7/16" bolt) with an impact tool (a must).
This will save you a day's worth of pain and grief and worth the $70.00.
Question about MVWX500XW: Bravos X Top Load Washer with Low Water Wash
...wash plate (agitator) will not turn during wash cycle; basket and wash plate spins freely without clothes but when it has a load the wash plate will not agitate. It tries to move back and forth but ...
Question about MVWX500XW: Bravos X Top Load Washer with Low Water Wash
An article of clothing went underneath the washng plate in my kenmore elite calypso washer. How do I get it out? After washing some bed sheets, I noticed that the sheet got caught under the washing ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions