Questions & Answers for: wand connection

...when you pull back, it separates right above the off /on switch There may be damage to where the wand connects to the back of the vacuum cleaner - you should see two grooves on the wand and two on ...

...w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I ...

connection at the top of the handle is a little loose or the electric tabs are loose where the hose connects. Any ideas? Depending on the age of your 2100, you will need to replace, the wand cord, the

...wand that connects to the power head at the powerhead connection broke(sheared off) fine crack Hello, Unfortunatley the Wand for your Miele is sold as an entirely assembly only. Miele does not sell ...

...wand where the electrical connection is made between the wand and the pole. You may see corrosion, which will cause the connection to be flaky and the power assist to surge on and off. In any case, a ...

how to turn it on and how to program it too wii I have purchased this wand in the past and I found it to be very troublesome and prone to many issues. The Nyko wands also had some that were not ...

wand? Take lid off and see if the knob clib connection to the steam valve is come out. Otherwise, possibly the steam valve's portioning washer is hardened and stuck. BUt sound slike shaft is broken or

...wand and nozzle connection on my Pressure washer Model 580.752070 How to restore seal between Wand and nozzle? Please point me in the right direction to resolve this problem Turbo Wand and spray ...

water to pressure washer but no further Did you check to see if the wand is any good? Connect the hose to washer, and turn on water. With wand connected hit the trigger. Water should come out - if not

...wand. Check the connection point on both the hose and the wand for any visible damage or debris that may be preventing the hose from disconnecting. If the connection point is clear of debris but the ...