Questions & Answers for: wan light

wan light will not come on The network cable from your broadband or DSL modem needs to be plugged into the WAN port on the router. If the modem is connected to your provider, then the WAN light should

...WAN light Hi. My problem is the wan light on my modem. When i first start the modem the wan light flashes about 10 or 20 times then goes off (which meens no internet connection) It is setup properly ...

WAN and wireless light up again and the cycle continues. The internet connection drops from my computer every time the router resets. This happens whether or not I have anything plugged into 1-4. When

...WAN 2 is a bit flaky, bandwidth varies from Max 3mbt/s to 200kbt/s. Any light you can shed would be welcome. Thank you. Try check with your subnets, if your subnet on your SBS is the same as your ...

...wan light dlink di-524. wan light suddenly appeared and i cannot connect to the internet. i tried using the router to another ip address/broadband cable but still no wan light If no wan light bypass ...

how to turn WLAN switch on the Phat PSP the wan switch is on the lower left side. slide it down and the WAN light should turn on. on the Slim PSP the wan switch is located on the top.

no wan light WAN detects Internet - No WAN = no Internet detected going through... Call ISP first

...WAN light and LAN lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection. if they stay on they ...

wan light is stable not blinking I would say that is normal as the wan light on my modem is stable The blinking lights are the ethernet and internet lights

light indicated. There's Power, Status, WAN, WLAN, and LAN LEDs. The WAN LED only indicates that the WAN port is connected to another device, e.g., cable or DSL modem. Check on your cable or DSL modem