Questions & Answers for: vtech line in use

...line on both Main bases and use all 4 cordless phones? I have the vtech dect6.0 with one answering system and two remote docking systems.I can phone out from the remotes but cannot receive incoming ...

line in use but the phone isn't being used Check the vtech website. They are attributing the problem to low voltage on the phone line. My parents started having this problem with a pair of Vtechs that

...vtech phone keeps saying line in use and parallel set is on. I can't get a dial tone. only a busy signal. DO you have a 2 line model? If so check and make sure the conf (conference) button is not ...

...Line in Use"? vtech model cs6229-3 These phones look at the voltage on the line to determine if the line is in use. Do you have any devices on the line that get power from the phone line? If so, they ...

...vtech phone base keeps flashing line in use but there is no handset in use I have unplugged everything and taken out batteries and checked in another phone jack as well See if you can open and check ...

...vtech phone says line in use and the line is not in use. How do I fix? Checked batteries...ok. Unplugged all units and plugged back in after a few minutes. My land line is working fine! I just fixed ...

vtech cordless phone model CS6919-2 saying line in use what do I need to do to corect this problem? Line in use if one of the cordless phones has not been hung up properly or the end call button has ...

line in use message on vtech phone vetch model # cs6328-3 It mean another phone is presently using the same phone line. ...

...has 4. If you indeed have both lines on 1 wall jack, use the 4 pin cord and plug it into the Vtech jack marked 1+2. The alternative is using 1 RJ11's each with 1 number and use 1 cord for each

Vtech T1300 LINE IN USE displayed when line not in use The "LINE IN USE" error message on a Vtech T1300 telephone can indicate that there is a problem with the telephone line or the telephone itself. ...