Questions & Answers for: Pontiac Sunfire vtec solenoid

2002 Sunfire TCC Solenoid replacement I need to replace the TCC Solenoid on my 2002 Pontiac Sunfire. Where is the TCC Solenoid located at? Inside or outside the transmission? Thanks for any assistance

Ad

cant f the transmission solenoid located on a 1996 pontiac sunfir wheres the transmission solenoid located on a 1996 pontiac sunfire 2.4 liter You have to pull the transmission pan off to acess them.

Ad

car will not start first thought it was the battery which turned out not to be true then found out it was the starter, starter has been replaced but car still will not start. It clicks twice and thats

turn ignition on but car wont crank..it will start if u turn key on and jump the solenold The starter solenoid is bad or the ignition switch is bad. Check the solenoid to see if it is getting power. ...

Do I hAve to replace the stater or the starter solenoid when the car just clicks and doesn't start for sunfire 2003 model sounds more like the solenoid, just make sure that your battery cables are ...

Question about 2001 Sunfire

1 Answer

It wont start. Buying a starter but was told it might be the "cylnoid"? Buying a solenoid without a starter is the same as buying a hamburger without the bun. The solenoid sits on top of the

2004 Pontiac sunfire shifter gets stuck in "park" when cold. Mainly in the cold but sometimes in warm weather. My parents 2004 Pontiac Sunfire will not shift out of park. Is there a switch in the ...

...valve on a2002 sunfire http://www.rockauto.com/catalog/x,carcode,1431633,parttype,4936 is a vtec solenoid valve. it located on your left behind the valve cover . vtec solenoid looks like a round

vent solenoid location on a 2003 sunfire On a 2002 Sunfire, the fuel vapor canister purge solenoid (AKA canister vent solenoid) is between the engine and the firewall, up high near the hood. It's a ...

Question about 1997 Sunfire

1 Answer

pontiac sunfire starter issues? starter not disengaging Either your solenoid is sticking or your key switch is bad. Test by disconnecting the positive line to the starter (cover the connector with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...