Questions & Answers for: Honda Prelude vtec solenoid

honda prelude 1993 vtec 4ws Parked this car last night with no problem, but today the car will not start. Engine crancks just fine, but will not fire up. Any suggestion ? Thank you in advance. Is the ...

vtec 2.2 all lights work recentlly put in a master cylinder for my clutch since then wont turn over was running fine before then but can be push strated Sounds like you accidently pulled the thin wire

vtec does not work rpm only 6500,and vtec does not work.does anyone know where the problem is?2.2prelude.thanks My guess is your vtec went into "limp mode". There are various reasons why it does this ...

VTEC Auto-Tiptronic Transmission Problems Hi my prelude started by slipping out of gear, and was losing transmission fluid. Not it will not go into to gear at all, and I am hoping against hope that it

1994 honda prelude vtec speedometer tach problem I have a 1994 honda prelude vtec 5 speed and most of the time my speedometer seems to work fine but tach does not work at all. it always shows too high

...you for a part number? I think the parts store may ask you for engine size (2.2 liter) and is it VTEC or not VTEC. If yours is VTEC, it should say it on top of the engine. Here is an example of

...of 2006 2 a 87 would it fit it Just for example i have seen on the net a 1987 prelude with a 2.2L Vtec nicly done but the front wheels looked towed out.So you have to think about weights engine are ...

1996 honda prelude non vtec will not go over 3000rpm ,. Begins missing and chugging....have put on new coil ,plugz, wires ,rotor ,distr.cap and distributor .Ecu throwing code 8 (TDC) PLEASE HELP ME !!

i need to know how to wire up the motor of a 95 honda prelude h23 vtec the original motor was a 2.3 s.i. and the motor that we put in it is a h2.3 vtec out of 95 honda accord ex we are having trouble ...

...ruled out oil pan, rear main, oil cooler/filter and vtec solenoid any ideas IN a car this old, the drain lines in the head for the oil might be plugged up. Check them and replace the valve cover ...