Questions & Answers for: volume control motor

Question about RX-318 Receiver

2 Answers

...volume control is lose and you have to hold to get it to work. It is mounted on a board that pugs in on the main board. Where can I buy one.The number on the volume control board is MCS M27A The ...

Ad

Question about RX-318 Receiver

2 Answers

...volume control has to be serviced. Either the drive circuit or the motor/linage is defective just clean it with alcohol and reworks solder joint so it will function normally.. hope this may

Ad

Question about RX-318 Receiver

1 Answer

...volume control reverts to the silent position, ie it rols back and won't stay put. As if a damper has been damaged or stopped working. Can you suggest a fix please, any help much appreciated Hi, If ...

Question about Acoustic Wave (32022) 5-Disc CD Changer

1 Answer

...volume control is sometimes problematic.Seems like it needs an expert cleaning.Is it worth fixing? A new unit is around 1,000.00. thanks Tony. Clean lense on cd pickup. Remove spin motor. Spray some ...

Question about Acoustic Wave (32022) 5-Disc CD Changer

1 Answer

...volume control repeadly (6x) is repaired and then doesn't work. can you hear the motor working,if not the motor or drive belt may be faulty, if it is working the the volume potentiometer may need ...

Question about TX-DS838 Receiver

1 Answer

volume control. It had been intentionnaly designed like that, to achive a quiet operation at low hearing volume. But if the fan don't move by cranking up the volume at 1/2 to 5/8 of the volume control

...the main volume is moter controlled not endless digital step level volume,m it could be a problem with the motor control circitry, take it to repair guy along with the renote to isolate the ...

...motor on the volume controller knob unit. The digital output must be converted through the D/A converter to a motor driver to show the indication of volume . However if there is no change with the ...

Question about RX-V1000 Receiver

1 Answer

...volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two ...

volume control needs cleaning with Electrical Switch Cleaner. You would have to remove the case and look. It is worth a quick spray. This says it has a motorized volume control. https://www.google.com

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...