Vertical hold not working For a while my TV was having a power up issue, when the TV would begin to power on it would automatically turn off again?? After unplugging and plugging back in it would tend
Question about WT-46805 46" Rear Projection Television
...vertical hold This model works great when it warms up but when cold, vertical will not hold. picture scroll when cold. Thanks in advance Don Rolling picture had a few with bad capacitors Picture of ...
vertical hold adjustment 1992 model number CS3515R mitsubishi tv. The vertical hold needs to be adjusted, but I can't find where to adjust it. Loss of vertical sync or any other problem with your Mits
vertical hold on tv Can you adjust the vertical hold with the remote? There is no vertical hold knob on the TV. The picture goes back and forth from fine to rolling up and down rapidly. Thanks so much
vertical hold problem on mitsubishi rear projection vs50,cant find V HOLD adj on circuit board faukty PIP module will cause the TV to roll on that model as vertical sync runs through the PIP module.
...Vertical Hold out. The picture likes to roll up and down rapidly, for a couple of moments. Has a tendency to do it when the picture on the screen is very white or light. There's no vertical hold knob ...
Question about VS-50605 50" Rear Projection Television
...vertical hold is off but can't find ajustment i cannot find the adjustment for vertical hold Same problem with my Mitsubishi model VS-5071. Found all other adjustments EXCEPT vertical hold. Someone ...
vertical hold problem. color is good but vertical hold doesn't hold. I am would loike to be able to repair myself because TV is very heavy and repair shops are 100 miles away. Thanks Tony Buy a new TV
Question about WS-55313 55" Rear Projection HDTV-Ready Television
mitsubishi ws-55313 vertical hold problem with tv This set does not have a vertical hold control etc---try to explain what the set is doing or not doing so I or another expert can help you. SD TECH
Question about WS-55313 55" Rear Projection HDTV-Ready Television
Vertical hold problem on mitsubishi rear projection VS 50605 can't find reset button. Where can I find it. Your Vertcal Hold Problem Is Due To Lack O f( Sync) Hold Which Is Usually Caused By Defective
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions