...venting? You will need the take the microwave down and take the shell off. Then take the vent fan out and turn it around the opposite direction and it will blow the other way. Thank you for your
Question about Spacemaker JVM1640SJ Microwave Oven
...vent of the microwave is. So to connect the microwave top vent (cant use the back vent option) to the 3.5" x 10" house-vent, I have to use an elbow joint (airflow goes sideways and up) angled up to ...
Question about Electric PVM1870SMSS Microwave Oven
...Vent on my GE PVM1870 Microwave keeps opening and closing even after vent is turned off or use of microwave has stopped. When the unit begins the never ending opening and closing cycle, turn the vent ...
Question about Electric PVM1870SMSS Microwave Oven
...microwave vent hole? I had a similar problem, it didn't matter since most of the new over the stove microwaves can vent back into the house as an option. The hood should have been a 30 inch and the ...
Question about Spacemaker JVM1640SJ Microwave Oven
...microwave will vent either out through the top or the back. A damper will be needed if it was not saved when the unit was installed. A list of other items are listed in the installation instructions ...
microwave vent blower works, but has no vent suction. check the filter(s) under the microwave. The normally fill with cooking grease and clog producing less suction. Remove the vent filter(s) and turn
Question about Spacemaker JVM1640SJ Microwave Oven
microwave active vent sort of interferes with the outside vent, thus more of the cooking smell being blown into the house instead of the outdoors. I was thinking of simply disconnecting the gizmo that
Question about Appliances Over-the-Range Microwave Oven
microwave has a vent on it that should be venting that steam. I don't know of anything you could put under there that would solve your problem as that is where then vents are and they would be blocked
Question about Spacemaker JVM1640SJ Microwave Oven
...vent fan on a GE Microwave/Convection oven to a top vent. After rotating fan assembly 90 degrees, so the blower wheels are facing up, it's still venting out the front. What else can/needs to be done ...
Question about 1.6 Cu. Ft. Over-the-Range Microwave
...microwave vent not working just had our contractor install this microwave and when i turn on the vent the fan is working and i can feel the exhaust, which is quite strong. the problem is there is no ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions