truck will not turn over but when batteries are tested wtith meter both are reading 24 v Double check readings/connections. The F350 was rarely built with a 24VDC electrical system. If it is hooked up
...the battery seems to be holding a charge but when i turn the key on the voltage drops to almost 7 vdc, and therefore not enough to turn over the engine. And i was wondering what is the round thing ...
...the ignition to the starter solenoid. When the key is turned to start that lead (+) should have 12 VDC to ground. If there is 12 VDC power to that lead when the key is turned to start then the ...
...cab long bed duelly, the side rear fender lights will not work. I have taken a volt meter set to VDC and I get a reading of 1.6-1.8 vdc on it. I am trying to use led lights I have had them on ...
Question about 2005 F 350 Super Duty
is it a diesel or gas, because there is a glow plug relay also. Need more info !!! You can apply 12 vdc directly to the starter wire from key and see if relay clicks
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
360 Questions
311 Questions
