Questions & Answers for: Nissan 350Z vdc light

xenon lights blown fuse My 350z has xenon lights, the xenon light on the passenger side keeps shutting of due to a blown fuse. I replace the blown fuse with a new one, turn the lights on and ZAP!!! ...

is it common for the battery to die after 2 weeks of not starting up the car it happened a couple of times no lights were left on Depending on your battery, no it's not common. If your battery is ...

350z speedometer stuck at 0 with VDC.TCS/ABS/Slip lights on The speedometer on my 350z suddenly stopped working. It sits on 0 and the digital reads 0 as well. Also the VDC/TCS/ABS/Slip lights all came

...on my 350z suddenly stopped working. It sits on 0 and the digital reads 0 as well. Also the VDC/TCS/ABS/Slip lights all came on. See if there are codes stored, pull them and start from there. ...

both my tail lights went out and my turn signal doesn't work when i flick it to the left nor does my hazard lights. however, my front light and right signal work but not when i press the hazard. i've ...

my tail lights don't work but brake lights do, what's the problem? my tail lights don't work but brake lights do, what's the problem? Check your fuses to make sure they are OK.

fuse layout Cabin turn signal not working Hi QQ, a 12 volt circuit light will be what's needed, turn the drive lights on and put the circuit light over the fuse box and work from there. Cheers Greg.

fuse box schematicsdiagram i need to see which fuse controls each function G'day Steven, a 12 volt circuit light will be what's needed, turn the drive lights on and put the circuit light over the fuse

tail lights and fog lights Tail lights and fog lights werent working, took it in mechanic switched around low beam and fog lights relay (supposedly what he did as too what he told me) lights worked ...

fuse box layout Battery drains after a day not driving Could be a parasitic drain like the underhood light, trunk light, floor light, map light, etc. not turning off correctly, something left plugged ...