Questions & Answers for: HP vdc

Question about HP Compaq 6710b Notebook

1 Answer

No power at 19.5 VDC jack Was on battery power. Switched to off. Got to airport to recharge...nothing. Power supply is good. Computer does not recognize that power is available. You will need to call ...

Ad

Question about Compaq dc7100 PC Desktop

1 Answer

http://pinouts.ru/Power/atx_v2_pinout.shtml Pin Name Color Description 1 3.3V Orange +3.3 VDC 2 3.3V Orange +3.3 VDC 3 COM Black Ground 4 5V Red +5 VDC 5 COM Black Ground 6 5V Red +5 VDC 7 COM Black ...

Ad

Question about Compaq dc7100 PC Desktop

1 Answer

Pin Name Color Description Pin Name Color Description 1 3.3V Orange +3.3 VDC 2 3.3V Orange +3.3 VDC 3 COM Black Ground 4 5V Red +5 VDC 5 COM Black Ground 6 5V Red +5 VDC 7 COM Black Ground 8 PWR_OK ...

Question about Pavilion dv4217cl PM 740 1.73 GHz 1GB 80GB DVD R/RW DL 15.4"EH477UA PC Notebook

1 Answer

...not power up with ac adaptor or with battery, does not show charge light when hooked to ac has 18.3 vdc on laptop end of ac adaptor The Power cable might have gone bad but if changing the power cable ...

Question about Pavilion dv4217cl PM 740 1.73 GHz 1GB 80GB DVD R/RW DL 15.4"EH477UA PC Notebook

1 Answer

Have HP PE1230 monitor, I am getting 12.5 VDC from red wires but nothing from the black wires from the Power Supply to the Main Board. Power will not come on on the monitor. dlquadt698, possible ...

Question about Compaq Presario V2000 Notebook

1 Answer

COMPAQ V2030US POWER ON WON'T START New Power Supply (Reads 19 vdc on Multi Meter) but NO 'Power' light and NO START-UP ! if there are no Power light,you battery might be broken or

Question about Compaq WF1907 Monitor

0 Answer

...screen. The front panel controls nor does vga input make it to the screen. P/s voltages are at +5.3 vdc and +22 vdc. The t/s section says check the video cable to the LCD, I verified the continuity ...

Question about LaserJet 4600 Printer

1 Answer

...has occurred the .4 points to the formatter fan (F1) is bad. Connector J1004. Voltage should be 24 VDC between pins 1 & 3. If it is, then replace the fan, if it isn't, replace the DC Controller ...

Question about OfficeJet J4580 All-In-One InkJet Printer

1 Answer

...the printer to not power up? The printer was dead and I found that the adapter did not supply 32 VDC anymore. I replaced the power adapter with a new one but the printer is still dead. Check the ...

...getting from the stator assembly? I have already changed the rectifier but I still only getting 12 VDC across the battery. If your battery is reasonably new , fully charged and in good condition I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top HP Computer and Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...