fuel injection, so the fuel pump is located inside the fuel tank which usually means you will need to remove the fuel tank from the vehicle to access the pump. I recommend you find the fuel pump relay
1998 Isuzu. no fuel flow. Any other possibility 1998 Isuzu Hombre. I have no fuel flow. Is there any other possibility other than the fuel pump? It could be the fuse for the fuel pump or the fuel ...
2000 Isuzu Hombre/Chevy S-10, 2.2L 4cyl. It starts fine, but wants to stall until it warms up a bit. After that, putting it into gear, it tries to stall. Any acceleration at first, it wants to stall. ...
Question about 1998 Hombre
...fuel into your cylinders and are causing hydro lock My 98 Hombre had the warm hard start issue as well, replaced fuel pump, the purge pump, charcoal canister and the fuel management device, also ...
Question about 1996 Hombre
...and rechecked all connections please help first off check that your fuel pump is sending fuel to injection system. Usually there a release valve on the fuel rail somewhere. check it for fuel
no fuel going to the carb Bad fuel pump Fuse / relay Plugged fuel filter Broken fuel line.
head bolt torque spec 4hk1 our Hombre used this engine. The LK5 (also called the Vortec 2800) is a 2,770 cc (169 cu in) straight-4 DOHC engine, Applications include the 2000 Isuzu NPR350A The 4HK1-TCN
Question about 1998 Hombre
Why does my 40a ignition fuse keep blowing out when I try to start my car which engine.? which fuse box.? what is exact name. of fuse. just "ignition" so its really a Chevy S10. 2.2 L I4 4.3 L V6 my ...
Question about 1996 Hombre
...fuel. for sure.
here is a file I found on the web
http://jeepdied.com/look/24hr/hombre-x.pdf
shows you what you have.
and ...
Does a 98 isuzu hombre have a fuel pressure release valve? what do you mean, that is GM CAR, END TO END WITH Plastic ,isuzu tag. what are you attempting or the job what is wrong, why not say what you ...
Usually answered in minutes!
106 Questions
108 Questions
74 Questions
20 Questions
24 Questions