Questions & Answers for: vapor lock engines

...vapor lock just doesn't happen on newer cars that are fuel injected like yours, it was carburetor equipped cars that vapor locked it acts like vapor lock...... its in the fuel recovery system.... its ...

...Vapor lock can affect any kind of engine during normal operation where the outside ambient temperature remains high, or the fuel system becomes overheated because of high engine temperatures or lack ...

Vapor lock is much less likely on a fuel-injected engine with an electric pump in the fuel tank. However, an engine with port fuel injection may experience vapor lock if the injector or fuel overheats

...vapor lock in the cooling system cause the engine to not spark and through off the camshaft sensor on a scanner in a 2001 dodge dakota sport 4.7 L v8 magnum manual transmission No. To begin with, ...

...vapor lock problems? vapor locking after 10 minutes of turning engine off Fuel injected engines cannot get vapor lock. First you need to explain how you came to the conclusion if vapor lock. But this ...

...vapor lock on my 1999 Buick century Vapor lock occurs when the gas in a fuel line turns from liquid to vapor, before it reaches the engine. The first signs of vapor lock are normally when your engine ...

...Vapor lock is something that was associated with carburetors not fuel injection ! Do you have a check engine light lit on the dash ? How long must it sit before it starts ? Are the cooling fans ...

vapor lock If it is a gas engine, its almost impossible to get vapor lock. Vapor lock is when liquid gasoline turns to a vapor which will not flow thru a carburetor. The usual cause was hot fuel lines

...Vapor lock can be caused by many different things, all coming down to the same root cause: too much heat in the fuel feed lines. Low fuel pressure can cause the amount of heat needed to vapor lock to ...

...vapor lock... thats just the angle, speed of delivery, size of hose in vehicle, etc that causes the gas to spit out,, try not putting it in so far, and use a different angle.. (mine does the same ...