Cant keep my RM 250 2 stroke running It starts to turn over but cant stay started. We cleaned the carb and it ran for while but doesnt want to start now. We checked the rings and reeds and replaced ...
I have trouble with the chain tighteners on the rear swing arm seizing up which causes the heads on the bolts to round off. I have just managed to break off the bolt on the brake side. What is the ...
the driveshaft will not turn If the kick starter operates normally the likely cause for a transmission lock up is bent shift forks. The bent forks are trying to engage two speeds at once i.e., 2nd and
2008 rmz 250 4 stroke i was riding it and all of a sudden it cut off and now the kick start wont move but shift through gears just fine i think the top end is locked up i'm not sure could the piston ...
my 2005 rmz 250 wont kick start it will push start but when i give it fuel it boggs and dies just put it new plug and it made no difference, it has spark and compression and fresh gas...please help!!!
well the motor locked up and i couldnt kick it at all shifted threw all the gears just fine but i wuz messing with it and i ran through all the gears trying to turn the back wheel and knock it loose ...
well the motor locked up and i couldnt kick it at all shifted threw all the gears just fine but i wuz messing with it and i ran through all the gears trying to turn the back wheel and knock it loose ...
...lock up like this they get vapor locked the best thing to do is let it set do not try and start it until it free's up it could bend the valves but i dont kno about the smoking unless you tried to ...
It lockup but took clutch out an it unlocked. Then it ran. Then it locked up again. It the kick start? It wont move You need to replace the complete clutch Assembly sounds like it is hanging up or ...
Usually answered in minutes!
67 Questions
60 Questions
0 Questions
2 Questions