Questions & Answers for: Suzuki RM 250 what is vapor lock

i have a93 rm 250 clutch not engaging i have a93 rm 250 i put a new hub on it i just cant figure out why my clutch is nt engaging does any body know the specs of the springs I am going to stick my ...

how do you tighten the chain on a 1986 230s? Loosen the axle nut Unlock the rear adjuster screw locknuts Adjust both sides equally till there is 3-4cm of play on the chain - ensure the wheel is ...

I have a 2003 rm 250 2 stroke that died on me and now locked up. I have a 2003 rm 250 2 stroke that died on me and will not kick. It is locked about half way down in the kick. Can you advise me on ...

2003 RM 250 THE BIKE HAD 15-20 HOURS ON IT FROM NEW.I THEN DID A TOP END JUST RINGS.I BROKE THE NEW RINGS IN AND I PUT 8 HOUR MORE ON THE BIKE AND SHE LOCKED UP.AFTER A NEW CYLENDER AND PRO X PISTON ...

what is the spec for oil in the front forks on a 2004 suzuki rm 250 If you have the stock valving, I would run 2.5w Motorex in the damper to compensate for the stiff feel stock, and thicker oil in the

there are 2 clips on the lower portion of the front brake caliper.. does anyone have a diagram of the caliper layout from a factory manual for a 2004 rmz 250. i need to figure out how each clip locks ...

How do I tighten the chain on my 1982 Suzuki rm250 rear wheel slides back to tighten chain Back of the rear axle nut, then back of the adjuster lock nuts. You then wind the adjuster bolts in equal ...