...Unhook tank, then hook tank back up. Open tank valve slowly, when you open valves to fast the tank valve thinks it has a leak and shuts down. Always open valve slowly and your problem will
...valve i have to turn on? It says all i have to do is screw in the tank. I can't figure it out. Please help. THank you If you have a piezo ignition, then all you will hear is one click when you turn ...
...position long enough to allow gas to reach the pilot. On my heater, this sometimes takes more than 2 minutes. Make sure the tank valve is open too. Thanks for posting at FixYa.com please vote thanks ...
...the large tanks for my furnace. Is there an automatic built-in shut off? yes turn off bbq at inlet valve , open control knobs let out gas pressure or undo line after control tap reconnnect then turn ...
...tank and regulator installed and have pressure to all other manifolds. What next? Swap burner valves to see if the problem follows the valve? Or just remove and try to clean it? If you're going to ...
...tank valve, disconnect the hose from the tank and waiting 5 minutes. Then reconnect the hose to the tank and open the tank valve VERY, VERY, SLOWLY (slow motion, slow). Once the valve is fully open, ...
...tank valve OFF and disconnect the hose from the tank. 2. Wait 5 minutes and reconnect the hose to the tank. 3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow). 4. Once the tank valve is ...
Usually answered in minutes!
12 Questions
5 Questions
3 Questions
2 Questions
6 Questions