Questions & Answers for: Hoover valve tank

...tank to the brushes,. The valve is always open regardless of the trigger position. It appears(visually) that the rigger operates the linkage to the valve assembly but the valve fails to close. I ...

...valve on water tank on hoover steamvac I have water linking form the water and detergent tank on the Hoover Steamvac with Rinse. The model number on the unit is F7205810 but I have not been able to ...

...tank valve leaks My Hoover Steam Vac clean water tank valve leaks as soon as I fill the clean water tank up. I can hold the tank in the air over the sink and see a stream of water running out the ...

My Hoover 97441-980 Dual Steam Vac won't hold detergent. The valve is bad. How can I get the old valve out so that I can replace it? Just grab the valve stem with a pair of needle nose pliers and pull

...of Hoover F7431-900? Does it take a special tool? pull down firmly on valves they will come out (soap or water side) then firmly push new valve in. By design valves are self sealing to plastic

will spray water, but not solution Hi there! The clean water tank has two spring loaded valves that releases the contents. Fill the clean water tank with water on both sides. Hold the cleaner up and ...

...tank repair how to install new spring valve,valve seal, valve stem Hello! The valve assembly is not replaceable on the F6210. We recommend replacing the solution tank part number 90001091, can be ...

the clean water tank with water on both sides. Hold the tank up and observe if water leaks from the valves underneath the tank. If either of the valves are leaking the clean water tank will need to be

...tank The center part of the valve (stem) pushes up (spring loaded) to release liquid. If it leaks it can (and should) be replaced. Also, check the black valve seal (conical shaped ring around the ...