Questions & Answers for: Danco valve tank

toilet lever doesn't rest horizontally in the bowl lever doesn't rest horizontally in the bowl bend the arm on the float in the toilet tank and this will change the handle position

...ste, 3Z-6H/C FAUCET REPAIR #1 THE FAT PART OF YOUR SPRING GOES INSIDE THE FAUCET ,AND SIT ON THE VALVE BODY(SEAT) #2 THE LITTLE BLACK WASHER SIT ON TOP OF YOUR SPRING #3 PUSH THE STEMS IN THE ...

does the rubber gasket go inside or outside the tank. Can't figure how to make it fit the base from inside It goes on from the inside.

...a Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold valve... One ...

Danco Universal tank lever - 89450A we have installed it but it will not lift and hold flapper up to flush. Readjust the chain or lifting mechanism associated with the flapper to lever connection.

Does it matter if the replacement tank lever is plastic or metal? We have a water saver toilet (2004) and the current lever is plastic. Sorry to read about your problem, I hope this helps you out. ...

hammering after replacing o-rings, valve is now hammering the rubber gasket inside of the shut off is probably loose, if it is just give it a quick tightening and that should do the trick

...the tank is removed to allow removal of the flush valve from the inside of the tank. The replacement flush valve is inserted into the hole inside the tank and the nut is installed to fasten it in ...

...VALVE AND VALVE HAS PRESSURE BUT WONT FILL TANK PLEASE HELP Make sure the flapper is seating properly. If you can't tell, put some food coloring in the tank part... you will see color in the

...sides, reinstall the handles and turn the water supplies back on. The white plastic on the newer valves is too tight and has to be pried off. Flip it 180 degrees and line up the smooth area of the ...