Question about Under Sink Water Filter
...tank valve on, turn tank on side & locate valve stem on bottom side. 3) Remove stem cap. 4) Drain all water out of tank through open RO faucet into sink. (Continue to leave RO faucet open throughout ...
...tank valve on, turn tank on side & locate valve stem on bottom side. 3) Remove stem cap. 4) Drain all water out of tank through open RO faucet into sink. (Continue to leave RO faucet open throughout ...
...tank valve on, locate the valve stem on the bottom or side of the tank. (this will look like the air stem on a bicycle or car tire) 3) Remove the stem cap. 4) Drain all water out of tank through open ...
...valve, running down the tank and collecting under/around the salt tank. As far as not cycling make sure the meter cable is plugged in, power to unit, etc. The valve may not be switching tanks, there ...
Question about Sediment Water Filter Heavy Duty
...tank? If you disassemble the valve completely (all metal parts) the valve itself is delrin plastic and is recyclable along with the brine tank. You may be able to scrap the softener tank. You will ...
Question about Sediment Water Filter Heavy Duty
...tank valve mark 59'' ok here goes, this may be pretty tough. I have tried for years to get a detailed servise manual and never found one. I have a mark 59 culligan water softner that i bought new in ...
...tank. There are several things to check for when not drawing brine. 1. The eductor/injector assembly is probably plugged with iron and needs to be cleaned. It is the part on top of the valve that has ...
...tank valve off first), turn the feed valve back on and see if water is coming out the product line to RO tank 2. Make sure the feed valve is supplying water. If it's a piercing valve they can get ...
...tank valve, etc). Leave the faucet on for several minutes to see if it needs to purge air in system. Sometimes carbon fines can plug up the head and restrict flow also. Make sure empty tank pressure ...
...top of membrane (no water) 5. Faulty water feed valve (piercing valve) 6. Fines from post carbon filter have plugged up the manifold (head) of RO unit. 7. Bad valve on RO tank 8. Plugged drain line ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions