Questions & Answers for: valve noise Dishwashers

Question about 1999 Sunfire

1 Answer

...valve noise pontiac sunfire 2.4 engine sounds like it has valve noise.how to adjust valves so they dont knock If it's a ticking noise that speeds up with the speed of the engine, it's a worn valve ...

Ad

valve noise. If you think its valve noise, have the dealer check it or a shop that does a LOT of Toyota work. Special tools and shims are needed to adjust the valves. Its a LOT of work and will not be

Ad

Question about Pro Series Side Mount Sand Filter 30" S310s

1 Answer

...noise, the valve is probally an 1 1/2" valve. The volocity of the water through the valve will cause cavation and this noise. When you get to the point where you need a new valve you can fix this by ...

Question about 1999 Suburban

1 Answer

...valve train noise or detonation. The noise migration is due to system pressure imbalances and is not an indication of a component part malfunction such as faulty check valves. Perform strategy-based ...

...valve. Knocking noise present since overheat. Shop pulled valve cover nd replaced all lifters on left side (side with noise) noise got worse. Performance good, mileage same, no smoke. Seems to idle ...

...3.4 g m loud tapping noise in valves noise in valve train i may say is not from the valve train could be ticking sound if the valve has problem. tapping noise has when the head gasket leak

Question about 2005 TC 250

1 Answer

...valve noise valve noise seems loud and shoots some smoke. i dont know much about these bikes. man i bought it from told me that the noise is normal some noises are--but valves may need ajust--or ...

...valve job done and it makes a noise when I go to start it Take it back to whoever did the work and let them find the problem. They should stand behind their work. if that does not work then what kind ...

...noise from under valve cover but everything looks good, replaced water pump, hoses, timing belt. Was not making this noise prior to parts replacement. Double checked timing and runs great but the ...

...VALVE NOISE. WE RENEWED TIMING CHAIN AND TENSIONER. THE VALVE CLEARANCE IS OK.CHANGED OIL AND FILTER AS WELL. PLEASE HELP THANKS DEVAN The noise is most likely the valves tapping on the heads. Could ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...