...Valve Cover. It Is A Loader Ticking Noise But If You Run Can For A Little Bit Noise Seems For Lighten A Little But Don't Hurt Performance. Can You Help. Thanks Gary If it had any head work done such ...
...noise. It has high rpm and high idle speed. Error codes in OBD2 are p1506, p0102 and p0122. I read about these problems but i dont know what do i really do about it. Hope to hear from you soon. Check ...
noise from engine on cold start up only happens in cold weather when engine has warmed up it dissapears I was told its called moosing any ideas car is a cougar 2.5 v6 sound like you have have "valve ...
...noise". I have two engines, both Ztec, both are for mercury/ford mystique/contour, 2.0 l, the only difference is that the marks on the crank pulley are not the same. The two notches are not on the ...
noise in the engine compartment sounds like the candy pop rocks. But when you are stopped and go but go ez like start out at 10 mph and slowly build up your speed it runs like a champ. Any suggestions
Question about 1998 Contour
you the engine is damaged.As for the noise, it could be a long list of things including pistons and valves in the engine. A mechanic can check for codes and evaluate the engine and then give you
it be.? Runs bad I bet. If it's under the valve cover, most likely a bolt has stripped out of a rocker arm, could be a broken spring. You could be lucky if only a bolt/nut backed off causing the noise
Question about 1998 Contour
...of gas ,started pushing on gas pedal a lot .when got home noticed very loud clanking noises under valve cover / upper corner . could it be something easily fixed? Can I take valve cover off and ...
...belt cover! There are timing belt idlers and tensioner and variable valve timing on the exhaust cam. Any of those can make noise. I would get it repaired as soon as possible as not to damage
Usually answered in minutes!
875 Questions
534 Questions
405 Questions
353 Questions
309 Questions