Questions & Answers for: Ford F-350 valve gasket

Valve Cover Gaskets I am trying to find out if the 6.0 TDI is prone to gasket and seal leaks. This is my third time replacing the Front main seal ( 62,000 miles ) I had to replace the head gaskets and

Ad

...valve gasket I just bought this crew cab and the engine smells like it is burning oil, Ilooked at the manafold and saw an old oil stain coming from the valve gasket. Could some one please tell me how ...

Ad

Question about 2003 F350 Super Duty DRW SuperCab

1 Answer

...valve cover harness came loose, you need to check the plug going into the vavlve cover gasket with an ohm meter, if the ohms are really high ( or infinity) you need to pull the gaskets. The plug on ...

Question about 2000 F350 Super Duty Super Cab

1 Answer

...valve cover gasket so be careful to check those the connections they tend to burn up. The gaskets are reuseable if the connectors are good. Check the wire connectors over real good inside the valve ...

Question about 2003 F350 Super Duty DRW SuperCab

1 Answer

...valve too. Throttle body gasket or intake manifold gasket are also possibilities. If it's the Diesel engine, I guess I would start with the fuel filter. Does it start hard hot and cold? If it starts ...

Question about 2000 F350 Super Duty Super Cab

1 Answer

...and bateries . where are the 2 fusable links located at Were the valve cover gaskets and harnesses check? May have a wiring harness or valve cover gasket issue where the harness plugs into the ...

Question about 2005 F 350 Super Duty

1 Answer

...6.0 liter diesel has little to no accelaration lots of white smoke. I disconnected the air flow valve between the turbocharger and it runs fine but no power any idea if this valve is bad or whats ...

Question about 2006 F 350 Super Duty

1 Answer

...compression low. replace rings hone cylinders and replace head gaskets. while heads are off re lap valves. if bottom end looks good replace rod bearings and oil pan gasket. do not mix up con

...gasket will leak also disconnect your batteries because the wires for your glow plugs and injectors are molded into the valve cover gaskets there is a video on you tube just type in your truck and ...

...and the glow plugs and they are molded into the valve cover gasket over time the little tab that holds them together breaks and they come apart the gaskets are about 110 dollars through ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...